Esko Cutting Templates

First page 1 Next page Last page

Esko ArtiosCAD Style Catalog Re

Esko ArtiosCAD Style Catalog Reference

Esko Kortrijksesteenweg 1095 BE-9051 Gent Belgium Tel.: (32) (9) 216-92-11 Fax: (32) (9) 216-94-64

Other offices worldwide.

Written and revised by Adam Hartfield, June 2012. For use with Esko ArtiosCAD 12 or greater

All rights reserved. This material, information and instructions for use contained herein are the property of Esko Software BVBA. The material, information and instructions are provided on an AS IS basis without warranty of any kind. There are no warranties granted or extended by this document. Furthermore Esko Software BVBA does not warrant, guarantee or make any representations regarding the use, or the results of the use of the software or the information contained herein. Esko Software BVBA shall not be liable for any direct, indirect, consequential or incidental damages arising out of the use or inability to use the software or the information contained herein. The information contained herein is subject to change without notice. Revisions may be issued from time to time to advise of such changes and/or additions. No part of this document may be reproduced, stored in a data base or retrieval system, or published, in any form or in any way, electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from Esko Software BVBA.

This document supersedes all previous dated versions.

All product names are trademarks or registered trademarks of their respective owners. Correspondence regarding this publication should be forwarded to:

Esko Kortrijksesteenweg 1095 BE-9051 Gent Belgium info.eur@esko.com

Esko ArtiosCAD Style Catalog Reference

1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Corrugated Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 One piece containers/1 side rollovers . . . . . . . . . . . . . . . . . . . 3

31010W - 1 side rollover - Cover flaps . . . . . . . . . . . . 3 31015W - 1 side rollover - Cover flaps & lock . . . . . . . . . 4 31020W - 1 side rollover - Ears . . . . . . . . . . . . . . . . 5 31025W - 1 side rollover - Ears & lock . . . . . . . . . . . . . 6 31026W - 1 side rollover - Ears & lock/dust flaps off cover . . 7 31021W - 1 side rollover - Ears / dust flaps off cover . . . . . 8 One piece containers/2 side rollovers . . . . . . . . . . . . . . . . . . . 9 32015W - 2 side rollover - Cover flaps . . . . . . . . . . . . 9 32025W - 2 side rollover - Cover flaps & ears . . . . . . . . . 10 32030W - 2 side rollover - Cover panels meet . . . . . . . . . 11 32035W - 2 side rollover - Cover panels meet/with flaps . . . 12 32020W - 2 side rollover - Ears . . . . . . . . . . . . . . . . 13 32010W - 2 side rollover - Tuck . . . . . . . . . . . . . . . . 14 One piece containers/3 side rollovers . . . . . . . . . . . . . . . . . . . 15 71035W - 3 side rollover - Angled side/header slots . . . . . . 15 33015W - 3 side rollover - Cover flaps . . . . . . . . . . . . 16 33010W - 3 side rollover - Tuck . . . . . . . . . . . . . . . . 17 One piece containers/Center joint . . . . . . . . . . . . . . . . . . . . 18 36025W - Center joint - With dust & cover flaps . . . . . . . . 18 36020W - Center joint - With dust flaps . . . . . . . . . . . . 19 36010W - Center joint - Without dust flaps . . . . . . . . . . 20 One piece containers/Swing-in rollover . . . . . . . . . . . . . . . . . . 21 34011W - Swing-in rollover . . . . . . . . . . . . . . . . . . 21 34020W - Swing-in rollover . . . . . . . . . . . . . . . . . . 22 34010W - Swing-in rollover - Tuck . . . . . . . . . . . . . . 23 One piece containers/Wrap around . . . . . . . . . . . . . . . . . . . . 24 36030W - Wrap-around - Tuck with optional lock . . . . . . . 24 36035W - Wrap-around - Tuck/cover flaps/optional lock . . . 25

Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 71035W - Trays - Angled side/with header slots . . . . . . . 26 42020W - Trays - Four side rollover . . . . . . . . . . . . . . 27 42030W - Trays - Preglued infold . . . . . . . . . . . . . . . 28 42035W - Trays - Preglued outfold . . . . . . . . . . . . . . 29 42010W - Trays - Two side rollover . . . . . . . . . . . . . . 30 FEFCO Standards - 200 Series . . . . . . . . . . . . . . . . . . . . . . 31 F0200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 F0201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 F0202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 F0203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 F0204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 F0205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 F0206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 F0208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 F0209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 F0210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 F0211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 F0212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 F0214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 F0215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 F0216 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 F0217 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 F0225 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 F0226 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 F0227 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 F0228 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 F0229 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 F0230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 F0231 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 FEFCO Standards - 300 Series . . . . . . . . . . . . . . . . . . . . . . 54 F0300 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 54 F0300 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 F0301 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 56 F0301 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Esko ArtiosCAD Style Catalog Reference

F0301 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 F0302 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 59 F0302 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 F0303 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 61 F0303 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 F0304 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 63 F0304 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 F0306 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 65 F0306 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 F0308 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 67 F0308 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 F0309 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 69 F0309 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 F0310 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 71 F0310 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 72 F0311 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 73 F0311 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 74 F0312 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 75 F0312 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 76 F0313 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 77 F0313 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 78 F0314a . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 F0320 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 80 F0320 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 81 F0321 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 82 F0321 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 83 F0325 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 84 F0325 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 85 F0330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 F0351a . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 F0351b . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 FEFCO Standards - 400 Series . . . . . . . . . . . . . . . . . . . . . . 89 F0401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 F0402 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 F0403 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

iii

F0404 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 92 F0404 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . 93 F0405 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 94 F0405 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . 95 F0406 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 F0409 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 F0410 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 F0411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 F0412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 F0413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 F0415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 F0416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 F0420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 F0421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 F0422 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 F0423 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 F0424 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 F0425 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 F0426 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 F0427 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 F0428 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 F0429 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 F0430 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 F0435 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 F0440 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 F0441 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 F0442 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 F0443 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 F0444 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 F0447 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 F0450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 F0451 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 F0452 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 F0453 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 F0454 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 F0455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Esko ArtiosCAD Style Catalog Reference

F0456 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 F0458 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 F0459 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 F0460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 F0470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 F0471 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 F0472 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 F0473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 FEFCO Standards - 500 Series . . . . . . . . . . . . . . . . . . . . . 136 F0501 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 F0502 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 F0503 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 F0510 Body . . . . . . . . . . . . . . . . . . . . . . . . . 139 F0510 End Panel . . . . . . . . . . . . . . . . . . . . . . 140 F0511 Body . . . . . . . . . . . . . . . . . . . . . . . . . 141 F0511 End Panel . . . . . . . . . . . . . . . . . . . . . . 142 F0512 Body . . . . . . . . . . . . . . . . . . . . . . . . . 143 F0512 End Panel . . . . . . . . . . . . . . . . . . . . . . 144 FEFCO Standards - 600 Series . . . . . . . . . . . . . . . . . . . . . 145 F0601 Body . . . . . . . . . . . . . . . . . . . . . . . . . 145 F0601 End Panel . . . . . . . . . . . . . . . . . . . . . . 146 F0602 Body . . . . . . . . . . . . . . . . . . . . . . . . . 147 F0602 End Panel . . . . . . . . . . . . . . . . . . . . . . 148 F0605 Body . . . . . . . . . . . . . . . . . . . . . . . . . 149 F0605 End Panel . . . . . . . . . . . . . . . . . . . . . . 150 F0606 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 F0606a . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 F0606b . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 F0607 Body . . . . . . . . . . . . . . . . . . . . . . . . . 154 F0607 End Panel . . . . . . . . . . . . . . . . . . . . . . 155 F0608 Body . . . . . . . . . . . . . . . . . . . . . . . . . 156 F0608 End Panel . . . . . . . . . . . . . . . . . . . . . . 157 F0610 Body . . . . . . . . . . . . . . . . . . . . . . . . . 158 F0610 End Panel . . . . . . . . . . . . . . . . . . . . . . 159 F0615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

F0615a . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 F0615b . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 F0616 Body . . . . . . . . . . . . . . . . . . . . . . . . . 163 F0616 End Panel . . . . . . . . . . . . . . . . . . . . . . 164 F0620 Body . . . . . . . . . . . . . . . . . . . . . . . . . 165 F0620 End Panel . . . . . . . . . . . . . . . . . . . . . . 166 F0621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 FEFCO Standards - 700 Series . . . . . . . . . . . . . . . . . . . . . 168 F0700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 F0711 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 F0712 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 F0713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 F0718 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 F0747 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 F0748 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 F0752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 F0759 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 F0760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 F0761 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 FEFCO Standards - 900 Series . . . . . . . . . . . . . . . . . . . . . 179 F0900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 F0901 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 F0902 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 F0903 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 F0904 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 F0905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 F0906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 F0907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 F0908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 F0909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 F0910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 F0911 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 F0912 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 F0913 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 F0920 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

Esko ArtiosCAD Style Catalog Reference

F0921 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 F0929 Length Partition . . . . . . . . . . . . . . . . . . . 191 F0929 Width Partition . . . . . . . . . . . . . . . . . . . . 192 F0930 Length Partition . . . . . . . . . . . . . . . . . . . 193 F0930 Width Partition . . . . . . . . . . . . . . . . . . . . 194 F0931 Length Partition . . . . . . . . . . . . . . . . . . . 195 F0931 Width Partition . . . . . . . . . . . . . . . . . . . . 196 F0932 Length Partition . . . . . . . . . . . . . . . . . . . 197 F0932 Width Partition . . . . . . . . . . . . . . . . . . . . 198 F0933 Length Partition . . . . . . . . . . . . . . . . . . . 199 F0933 Width Partition . . . . . . . . . . . . . . . . . . . . 200 F0934 Length Partition . . . . . . . . . . . . . . . . . . . 201 F0934 Width Partition . . . . . . . . . . . . . . . . . . . . 202 F0935 Divider . . . . . . . . . . . . . . . . . . . . . . . . 203 F0935 Length Partition . . . . . . . . . . . . . . . . . . . 204 F0935 Width Partition . . . . . . . . . . . . . . . . . . . . 205 F0940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 F0941 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 F0942 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 F0943 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 F0944 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 F0945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 F0946 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 F0947 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 F0948 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 F0949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 F0950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 F0951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 F0965 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 F0966 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 F0967 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 F0970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 F0971 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 F0972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 F0973 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 F0974 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

vii

F0975 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 F0976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

3 Display Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Display bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

All side slope base . . . . . . . . . . . . . . . . . . . . . . 227 Angle Base End Joint . . . . . . . . . . . . . . . . . . . . 228 Angle Base Half Base . . . . . . . . . . . . . . . . . . . . 229 Display Base2- Center Joint Flg1 . . . . . . . . . . . . . . 230 Display Base 2-End Joint Flg . . . . . . . . . . . . . . . . 231 Display Base 3-End Joint . . . . . . . . . . . . . . . . . . 232 Display Base-Center Joint . . . . . . . . . . . . . . . . . . 233 Display Base-End Joint1 . . . . . . . . . . . . . . . . . . 234 Pallet Base . . . . . . . . . . . . . . . . . . . . . . . . . 235 Step Base-End Joint-Flange . . . . . . . . . . . . . . . . . 236 Display Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Counter Tray Header 2 . . . . . . . . . . . . . . . . . . . 237 Counter Tray Header 4 . . . . . . . . . . . . . . . . . . . 238 Display Tray Header . . . . . . . . . . . . . . . . . . . . . 239 Display Tray Header 2 . . . . . . . . . . . . . . . . . . . . 240 Display Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 4 Cell Power Wing Tray . . . . . . . . . . . . . . . . . . . 241 Display Tray With Dividers . . . . . . . . . . . . . . . . . . 242 Self Ship Double Back . . . . . . . . . . . . . . . . . . . . 243 Shelf Displayer1 . . . . . . . . . . . . . . . . . . . . . . . 244 Slope Stack Side . . . . . . . . . . . . . . . . . . . . . . 245 SS DBL BTM . . . . . . . . . . . . . . . . . . . . . . . . 246 SS Lean Front . . . . . . . . . . . . . . . . . . . . . . . . 247 SS SNG Back 1VS . . . . . . . . . . . . . . . . . . . . . 248 SS Tray Double BTM . . . . . . . . . . . . . . . . . . . . 249 SS Tray No Back Double BTM . . . . . . . . . . . . . . . 250 SS Tray Triple BTM . . . . . . . . . . . . . . . . . . . . . 251 SS Tray W Header . . . . . . . . . . . . . . . . . . . . . . 252 Easels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

viii

Esko ArtiosCAD Style Catalog Reference

Double Wing Easel . . . . . . . . . . . . . . . . . . . . . 253 Double Wing Easel Small . . . . . . . . . . . . . . . . . . 254 Single Wing Easel . . . . . . . . . . . . . . . . . . . . . . 255 Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 5 Panel Roll . . . . . . . . . . . . . . . . . . . . . . . . . 256 9 Panel Fill . . . . . . . . . . . . . . . . . . . . . . . . . . 257 9 Panel Roll . . . . . . . . . . . . . . . . . . . . . . . . . 258 9 Panel unev . . . . . . . . . . . . . . . . . . . . . . . . 259 Bowtie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 Patryfl . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

4 Folding Carton Standards . . . . . . . . . . . . . . . . . . . . . . . . . . 263 Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 111.01.ARD - Standard sleeve . . . . . . . . . . . . . . . 263 Friction tuck tops/bottoms . . . . . . . . . . . . . . . . . . . . . . . 264

122.05.ARD - Reverse top tuck on 2nd . . . . . . . . . . . 264 121.05.ARD - Reverse top tuck on 4th . . . . . . . . . . . 265 123.05.ARD - Straight tuck top on 2nd . . . . . . . . . . . 266 124.05.ARD - Straight tuck top on 4th . . . . . . . . . . . 267 Friction Tuck Tops/Unituck bottom . . . . . . . . . . . . . . . . . . . 268 122.01.ARD - Reverse top tuck on 2nd . . . . . . . . . . . 268 121.01.ARD - Reverse tuck top on 4th . . . . . . . . . . . 269 123.01.ARD - Straight tuck top on 2nd . . . . . . . . . . . 270 124.01.ARD - Straight tuck top on 4th . . . . . . . . . . . 271 Friction tuck tops/Slit lock bottom . . . . . . . . . . . . . . . . . . . 272 122.03.ARD - Reverse top tuck on 2nd . . . . . . . . . . . 272 121.03.ARD - Reverse tuck top on 4th . . . . . . . . . . . 273 123.03.ARD - Straight tuck top on 2nd . . . . . . . . . . . 274 124.03.ARD - Straight tuck top on 4th . . . . . . . . . . . 275 Friction tuck tops/Houghland bottom . . . . . . . . . . . . . . . . . . 276 141.10.ARD - Tuck on 2nd - Tab on 2nd . . . . . . . . . . 276 141.04.ARD - Tuck on 2nd - Tab on 4th . . . . . . . . . . 277 141.07.ARD - Tuck on 4th - Tab on 2nd . . . . . . . . . . 278 141.01.ARD - Tuck on 4th - Tab on 4th . . . . . . . . . . . 279

Friction tuck tops/Full flap auto bottom . . . . . . . . . . . . . . . . . 280 151.04.ARD - Tuck top on 2nd . . . . . . . . . . . . . . . 280 151.01.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 281 Friction tuck tops/Inturn auto bottom . . . . . . . . . . . . . . . . . . 282 152.04.ARD - Tuck top on 2nd . . . . . . . . . . . . . . . 282 152.01.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 283 Unituck slit lock top and bottom . . . . . . . . . . . . . . . . . . . . 284 122.07.ARD - RT top tuck on 2nd . . . . . . . . . . . . . . 284 121.07.ARD - RT top tuck on 4th . . . . . . . . . . . . . . 285 123.07.ARD - ST top tuck on 2nd . . . . . . . . . . . . . . 286 124.07.ARD - ST top tuck on 4th . . . . . . . . . . . . . . 287 Unituck slit lock top/Houghland bottom . . . . . . . . . . . . . . . . 288 141.11.ARD - Tuck on 2nd - tab on 2nd . . . . . . . . . . 288 141.05.ARD - Tuck on 2nd - tab on 4th . . . . . . . . . . . 289 141.08.ARD - Tuck on 4th - tab on 2nd . . . . . . . . . . . 290 141.02.ARD - Tuck on 4th - tab on 4th . . . . . . . . . . . 291 Unituck Slit Lock Top/Full flap auto bottom . . . . . . . . . . . . . . . 292 151.05.ARD - Tuck top on 2nd . . . . . . . . . . . . . . . 292 151.02.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 293 Unituck slit lock top/Inturn auto bottom . . . . . . . . . . . . . . . . . 294 152.05.ARD Tuck top on 2nd . . . . . . . . . . . . . . . . 294 152.02.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 295 Standard slit lock top/Standard slit lock bottom . . . . . . . . . . . . 296 122.09.ARD - RT top tuck on 2nd . . . . . . . . . . . . . . 296 121.09.ARD - RT top tuck on 4th . . . . . . . . . . . . . . 297 123.09.ARD - ST top tuck on 2nd . . . . . . . . . . . . . . 298 124.09.ARD - ST top tuck on 4th . . . . . . . . . . . . . . 299 Standard slit lock top/Houghland bottom . . . . . . . . . . . . . . . . 300 141.12.ARD - Tuck on 2nd - tab on 2nd . . . . . . . . . . 300 141.06.ARD - Tuck on 2nd - tab on 4th . . . . . . . . . . . 301 141.09.ARD - Tuck on 4th - tab on 2nd . . . . . . . . . . . 302 141.03.ARD - Tuck on 4th - tab on 4th . . . . . . . . . . . 303 Standard slit lock top/Full flap auto bottom . . . . . . . . . . . . . . . 304

Esko ArtiosCAD Style Catalog Reference

151.06.ARD - Tuck on 2nd . . . . . . . . . . . . . . . . . 304 151.03.ARD - Tuck on 4th . . . . . . . . . . . . . . . . . 305 Standard slit lock top/Inturn auto bottom . . . . . . . . . . . . . . . . 306 152.06.ARD - Tuck top on 2nd panel . . . . . . . . . . . . 306 152.03.ARD - Tuck top on 4th panel . . . . . . . . . . . . 307 Partial/full overlap seal ends . . . . . . . . . . . . . . . . . . . . . . 308 131.01.ARD - Flap style #1 . . . . . . . . . . . . . . . . . 308 131.04.ARD - Flap style #2 . . . . . . . . . . . . . . . . . 309 131.05.ARD - Flap style #3 . . . . . . . . . . . . . . . . . 310 131.06.ARD - Flap style #4 . . . . . . . . . . . . . . . . . 311 131.07.ARD - Flap style #5 . . . . . . . . . . . . . . . . . 312 Trays/Beers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 222.05.ARD - 6 corner . . . . . . . . . . . . . . . . . . . 313 222.02.ARD - Standard/Full drag . . . . . . . . . . . . . . 314 Trays/Brightwoods . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 261.01.ARD - Double sidewall/Double endwall/ Flap style #1 . . . . . . . . . . . . . . . . . . . . . . 315 261.02.ARD - Double sidewall/Double endwall/ Flap style #2 . . . . . . . . . . . . . . . . . . . . . . 316 261.03.ARD - Double sidewall/Double endwall/ Flap style #3 . . . . . . . . . . . . . . . . . . . . . . 317 241.01.ARD - Single sidewall/Double endwall/ Flap style #1 . . . . . . . . . . . . . . . . . . . . . . 318 241.02.ARD - Single sidewall/Double endwall/ Flap style #2 . . . . . . . . . . . . . . . . . . . . . . 319 241.03.ARD - Single sidewall/Double endwall/ Flap style #3 . . . . . . . . . . . . . . . . . . . . . . 320 221.01.ARD - Single sidewall/Single endwall/ Flap style #1 . . . . . . . . . . . . . . . . . . . . . . 321 221.03.ARD - Single sidewall/Single endwall/ Flap style #2 . . . . . . . . . . . . . . . . . . . . . . 322 221.05.ARD - Single sidewall/Single endwall/ Flap style #3 . . . . . . . . . . . . . . . . . . . . . . 323 Trays/Infold-Outfold . . . . . . . . . . . . . . . . . . . . . . . . . . 324 223.02.ARD - Infold/Outfold . . . . . . . . . . . . . . . . . 324 Trays/Kwikset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325

251.01.ARD - Kwikset tray with reinforcing tabs . . . . . . . 325 251.04.ARD - Standard Kwikset tray . . . . . . . . . . . . 326 Trays/Walker locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 281.01.ARD - Walker lock . . . . . . . . . . . . . . . . . . 327 281.02.ARD - Walker lock 2/tri-seal lid . . . . . . . . . . . 328 ECMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 100.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 110.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 120.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 130.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 140.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 150.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 334 160.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 170.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 171.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 337 180.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 50.01a . . . . . . . . . . . . . . . . . . . . . . . . . . . 339 60.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 70.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341 80.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 90.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343

xii

Esko ArtiosCAD Style Catalog Reference Welcome

Welcome

Introduction

Esko ArtiosCAD has pre-made design file templates called standards . These standards are grouped in style catalogs . This book is a reference of each standard contained in the ArtiosCAD Corrugated style catalog, the FEFCO style catalog, the Displays style catalog, and the ArtiosCAD Folding Carton style catalog. Style catalogs from other Esko products may be installed on your machine; please refer to the reference manuals for those products for pictures of those standards. Each design shown in this book was created using its default style choices. For those standards without folded documentation plots, single designs were created and then converted to 3D. You can add your own designs to the Style Catalogs in the Defaults module of Esko ArtiosCAD. For more information, see the Defaults chapter of the Esko ArtiosCAD Administrator Guide . To learn more about using standards, see the Builder chapter of the Esko ArtiosCAD User Guide .

This page intentionally left blank.

Esko ArtiosCAD Style Catalog Reference One piece containers/1 side rollovers

Corrugated Standards

One piece containers/1 side rollovers

31010W - 1 side rollover - Cover flaps

31015W - 1 side rollover - Cover flaps & lock

Esko ArtiosCAD Style Catalog Reference One piece containers/1 side rollovers

31020W - 1 side rollover - Ears

31025W - 1 side rollover - Ears & lock

Esko ArtiosCAD Style Catalog Reference One piece containers/1 side rollovers

31026W - 1 side rollover - Ears & lock/dust flaps off cover

31021W - 1 side rollover - Ears / dust flaps off cover

Esko ArtiosCAD Style Catalog Reference One piece containers/2 side rollovers

One piece containers/2 side rollovers

32015W - 2 side rollover - Cover flaps

32025W - 2 side rollover - Cover flaps & ears

Esko ArtiosCAD Style Catalog Reference One piece containers/2 side rollovers

32030W - 2 side rollover - Cover panels meet

32035W - 2 side rollover - Cover panels meet/with flaps

Esko ArtiosCAD Style Catalog Reference One piece containers/2 side rollovers

32020W - 2 side rollover - Ears

32010W - 2 side rollover - Tuck

Esko ArtiosCAD Style Catalog Reference One piece containers/3 side rollovers

One piece containers/3 side rollovers

71035W - 3 side rollover - Angled side/header slots

33015W - 3 side rollover - Cover flaps

Esko ArtiosCAD Style Catalog Reference One piece containers/3 side rollovers

33010W - 3 side rollover - Tuck

One piece containers/Center joint

36025W - Center joint - With dust & cover flaps

Esko ArtiosCAD Style Catalog Reference One piece containers/Center joint

36020W - Center joint - With dust flaps

36010W - Center joint - Without dust flaps

Esko ArtiosCAD Style Catalog Reference One piece containers/Swing-in rollover

One piece containers/Swing-in rollover

34011W - Swing-in rollover

34020W - Swing-in rollover

Esko ArtiosCAD Style Catalog Reference One piece containers/Swing-in rollover

34010W - Swing-in rollover - Tuck

One piece containers/Wrap around

36030W - Wrap-around - Tuck with optional lock

Esko ArtiosCAD Style Catalog Reference One piece containers/Wrap around

36035W - Wrap-around - Tuck/cover flaps/optional lock

Trays

71035W - Trays - Angled side/with header slots

Esko ArtiosCAD Style Catalog Reference Trays

42020W - Trays - Four side rollover

42030W - Trays - Preglued infold

Esko ArtiosCAD Style Catalog Reference Trays

42035W - Trays - Preglued outfold

42010W - Trays - Two side rollover

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

FEFCO Standards - 200 Series

FEFCO standards are corrugated standards primarily used in Europe.

Each standard is shown on its own page folded and unfolded.

F0200

F0201

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0202

F0203

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0204

F0205

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0206

F0208

F0207 does not exist.

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0209

F0210

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0211

F0212

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0214

There is no F0213.

F0215

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0216

F0217

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0225

F0226

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0227

F0228

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0229

F0230

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 200 Series

F0231

FEFCO Standards - 300 Series

F0300 Base

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0300 Lid

F0301 Base

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0301 Base

F0301 Lid

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0302 Base

F0302 Lid

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0303 Base

F0303 Lid

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0304 Base

F0304 Lid

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0306 Base

F0306 Lid

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0308 Base

F0308 Lid

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0309 Base

F0309 Lid

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0310 Body

F0310 Cover

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0311 Body

F0311 Cover

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0312 Body

F0312 Cover

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0313 Body

F0313 Cover

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0314a

F0320 Body

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0320 Cover

F0321 Body

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0321 Cover

F0325 Body

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0325 Cover

F0330

Esko ArtiosCAD Style Catalog Reference FEFCO Standards - 300 Series

F0351a

F0351b